ADAM-4510S-EE

Isolated RS-422/485 Repeater

Pro zobrazení cen se musíte přihlásit nebo zaregistrovat.

Číslo zboží: GA55601084 Produktové číslo: ADAM-4510S-EE Kategorie: Výrobce:
Poptat produkt
• Automatic RS-485 data fl ow control
• 3000 VDC isolation protection
• Surge protection RS-485 data line
• Transmission speed up to 115.2 Kbps
• Networking up to 1200 meters (4000 feet)
• Reserved space for termination resistors
• Power and data fl ow indicator for troubleshooting
• Power requirement: +10 to +30 VDC
• Mounts easily on a DIN-rail, panel or piggyback

Most industrial computer systems come with standard RS-232 serial ports. Though widely accepted, RS-232 has limited transmission speed, range, and networking capabilities. The RS-422 and RS-485 standards overcome these limitations by using differential voltage lines for data and control signals. The ADAM-4520/4522 converter lets you take advantage of RS-422 and RS-485 on systems originally equipped with RS-232. It transparently converts RS-232 signals into isolated RS-422 or RS-485 signals. You do not need to change your PC’s hardware or your software. The ADAM-4510S repeater simply amplifies, or boosts, existing RS-422/485 signals to enable them to cover longer distances. It extends the communication distance by 4000 ft. (1200 m) or increases the maximum number of connected nodes by 32.
Hmotnost 0.22 kg
Rozměry (produktu / balení) 150 × 85 × 51 mm
Výrobce

Advantech

Vstupní druh média

Metalické

Výstupní druh média

Metalické

Datasheet

Stáhnout datasheet:

3D Model

[canvasio3D width = ‚830‘ height = ‚600‘ border = ‚0‘ borderCol = ‚#F6F6F6‘ dropShadow = ‚0‘ backCol = ‚#FFFFFF‘ backImg = ‚/wp-content/themes/acipc-eshop/images/3D-background.jpg‘ mouse = ‚on‘ rollMode = ‚off‘ rollSpeedH = ‚0‘ rollSpeedV = ‚0‘ objPath = ‚https://eshop.autocont-ipc.cz/images/GA55601084/3dmodel/adam-4510s-ee.stl‘ objScale = ‚0.5‘ objColor = ‚#5c5c5c‘ lightSet = ‚7‘ reflection = ‚custom1‘ refVal = ‚7‘ objShadow = ‚on‘ floor = ‚off‘ floorHeight = ’42‘ lightRotate = ‚off‘ vector = ‚off‘ mousewheel = ‚on‘ Help = ‚off‘ loadingText = ‚Načítání 3D modelu, prosím čekejte…‘][/canvasio3D]
* Upozornění: 3D model slouží pouze pro ilustrační účely. Některé detaily nemusí být vyobrazeny. Design zařízení se může kdykoliv bez předchozího upozornění změnit.
Zpět nahoru